Install and use Mullvad app on Linux
What this guide covers
- Download and install
- Terminal instructions
- Log in
- Switch location
- Temporarily blocked internet – kill switch always on
- Report a problem
- Settings menu
- Quit app
- Advanced settings
- Uninstall the app
- How do I turn on DNS leak protection?
- How do I tunnel IPv6 traffic?
- Where can I find my app's local log files?
Download and install
This app should work on most modern distributions.
1. If you haven't already, begin by downloading the latest version of the app.
2. Before continuing, if you are using our older VPN client, you will first want to quit it to avoid any conflicts.
If you prefer using the terminal, use the following commands to download the file, and then follow our Mullvad CLI guide.
Debian/Ubuntu users (we are using gdebi in this example)
You will need to replace "MullvadVPN-2018.2_amd64.deb" with the name of the file that you download.
sudo apt-get -y install gdebi-core && sudo gdebi MullvadVPN-2018.2_amd64.deb
You will need to replace "MullvadVPN-2018.2_x86_64.rpm" with the name of the file that you download.
sudo dnf -y install ./MullvadVPN-2018.2_x86_64.rpm
After the app launches, enter your Mullvad account number and hit Enter or click the green login button.
If you don't yet have an account number, simply click the Create account button which will navigate you to our website's account creation page.
The app remembers your account number
We strongly encourage you to write down your account number for safe keeping. However, the app will locally save the last three account numbers that you've used, making it easy to log in without having to remember the number each time.
Whenever you're logged out, just click in the login field and a drop-down list will appear.
Once you've logged in with a valid account number, the app will automatically attempt to make a secure connection and simultaneously block your internet. You can see the status of your connection on the app's connection screen.
By default, the app will initially connect to a server in Sweden to increase the likelihood of a fast and stable connection. If you choose a different location, the app will remember your latest selection for the next time you start the app.
Know when you're connected
Once connected, the Mullvad app will visually signal this in a few ways:
- The padlock in the taskbar will turn green.
- "Secure connection" will be displayed on the connection screen.
- The location and name of the server you have connected to will be listed.
- A green GPS dot will mark on the map where you're connected.
Easily check your online privacy with Am I Mullvad
While you're connected to Mullvad, your browser could still be leaking information and therefore jeopardizing your privacy. Use our Am I Mullvad online tool to get a quick overview of your connection status.
To choose a different server, click on the Switch location button.
On the Select location screen, scroll and click on the country that you prefer and the app will reconnect automatically.
Some countries have a drop-down icon to the right. Clicking on this will reveal a list of cities or regions that you can specifically choose and connect to.
If the city or region also has a drop-down icon next to it, clicking on it will give you a list of specific servers.
Sometimes, you won't be able to select a location because its servers are currently unavailable. Such a location will have a red dot beside it and the name will be greyed out.
You can always check our website's server list to learn more about the situation.
If you want to disconnect, just click on the Disconnect button on the connection screen.
Know when you're disconnected
When you're disconnected, the Mullvad app will visually signal this in a few ways:
- The padlock in the menu bar will be red.
- "Unsecured connection" will be displayed in red on the connection screen.
- The real location of your internet connection will be listed.
- A red GPS dot will mark your real internet location on the map.
- The top bar of the app will be red.
Temporarily blocked internet – kill switch on
Sometimes, while the Mullvad app is connected, you may notice that your internet has suddenly stopped working. Check to see if the padlock in the menu bar has turned green with a red dot. If so, the connection screen in the app will also display "blocking internet".
This is the app's built-in kill switch at work, automatically blocking the internet upon VPN connection failure to ensure that your traffic is not accidentally leaked outside of our secure tunnel.
You will experience this in a few situations:
- if the app accidentally disconnects on its own
- if you run out of time on your account while connected
- while the app is establishing a connection when you start the app.
The app will block your internet traffic until a secure connection is made or reestablished, or until you manually disconnect from the app.
If you're worried about those times when you forget to start the app – leaving you unsecure – consider configuring your browser with our SOCKS5 proxy which will serve as your back-up protection.
Report a problem
If you're having issues, you can easily notify us with our in-app support form.
From the connection screen, click on the settings icon in the top right. From there, click on Report a problem.
As the form states, your app's log files are anonymized before being securely sent to us.
The Settings menu can be accessed by clicking on the settings icon in the connection screen.
From here, you have access to a variety of information.
Here you can view information pertaining to your account, including your account number, when your paid time runs out, and a link to our website to buy more time.
See the Preferences section in this guide.
See the Advanced section in this guide.
This tells you which version of the app you are currently running. Click on this and you'll be taken to our website to download the latest version (which we always recommend that you have!).
Report a problem
See the Report a problem section in this guide.
This is where you can enable/disable IPv6 communication; adjust settings for Network protocols, UDP ports, and TCP ports; and set a value for OpenVPN MSS.
Uninstall the app
apt-get purge mullvad-vpn
How do I turn on DNS leak protection?
DNS leak protection is always on. There is no option to disable it.
How do I tunnel IPv6 traffic?
Where can I find my app's local log files?
In Linux, open /var/log/mullvad-vpn/ to find openvpn.log, openvpn.old.log, daemon.log, and daemon.old.log.